?Product introduce

Using high thermal conductivity aluminium alloy and patent construct technology to design the produce.High lumen and low droop 2835smd as light source.Its advantage are long lifetime,energy saving,high efficency and environmental friendly.Inside constant current driver with IC,good quality and long lifetime about 30.000hours.

?Application places

Led tube suitable for most indoor ,such as home ,hotel,mall ,office,school ,parking lot,warehouse,factory ,supermarket,channel ,corridor and advertising box inside.The led tube is the ideal light source that replaces the tungsten halogan lamp and metal halogan .

? Product feature

Green lighting:The goods without any harmful heavy metal for humman,such as mercury lead.no flash during working,start fast ,no ultraviolet,won't bring the mosquitoes,won't broke as you open and close it frequently.

Circuit design:Using wide voltage constant current insolated driver,small size,transfer effiency ≥85%，with open circuit protection,short circuit protection,overload protection and lightning surge protection functions.It won't be damaged when the output voltage is not stable .The light with low noice,low heat ,high efficency ,energy saving,environmantal friendly and long lifetime.

Construct design: Complete set of parts,it is good for installing and maintenance.

work lifetime:LED heat manage technology ,decrease the light droop ,the working temperature is 25℃ and it can work beyong 30.000hours.

?Product size:

? Product specification darameter:

? Lumen

Test condition：24 hours testing every day during normal temperature 25℃

?The test date was tested in the dark room.

?The brightness is use the bright sensor and filter togerther to copy CIE human eye to reflect curve and then test.

?The CT & light intensity test allowable error is ±10%.

?Package information

? Remark（read it carefully before use it）:

1.The tube can connect the power with the two sides,professional design driver inside,its input voltage is AC 85-265v,50-60Hz.Only put the tube in 1.2m Tube8 light panel is ok,without any others equipment.

2.This tube can replace 1.2m fluorescent tube.User take down the fluorescent tube and then install the LED tube,but before do it something need cancle.Now you need check the lamp panel parameter,then install it according to the A.B C procedure in the right.

3.The product installation ,maintenance,protection and take down should be done after you turn off the power.in case of accident.

Installation steps

A:

As A picture ①connect the power line of light panel and the outer power line,then as A picture② put on the LED tube，then as A picture ③rotating the tube，then you can open the switch and the tube can work.

Installation　B:

If there is Rev starter ，Please as B ① take down the Rev starter，Then as B ② install the LED tube，also as B ③ rotating the tube 90°，Then open the switch is ok。

Installation C:

If there is ballast，first step is as C ① cut the power line of its two sides.Then as A ① connect the power line. Third as C ②install the tube，then asC ③ rotating the tube 90°，at last connect the power is ok.

? Note:

1、This product suitable indoor ,no waterproof.please don't use it outdoor ，wet,high temperature ,enclosed and inflammable and explosive places .

2、This product with certifications

3、The product should put in cool ，dry and tidy place.

4、Check the input voltage if fit the led tube,or it will damage the light.

5、This product is not dimmable light ,please don't usethe dimmer.

6、If there is something wrong with the tube during it work,please don't change the parts or open the tube without manufacture's permission,in case of accident and affect the warranty.

7、The specification will change with the update of goods.